**If the system is not properly flushed then a build up of old white ink can cause clogging in the system.**
1. Use warm distilled water to flush the lines out until the tubes are clear. The water temperature should be 52 C / 125 F temperature. (It may take some time to flush until clear. The greater the build up the longer it will take.)
2. Flush the distilled water out of the lines and then immediately follow flushing with Textile 2 Cleaning Solution.
3. Run ten (10) head cleaning cycles with the cleaning solution in the system to make sure the print head is completely clear of remaining residue.
Now the system is ready to receive the new BRIGHT INKS. This extensive flushing is required for the transition to the new bright inks; however it is never a bad idea to flush your entire ink system this way periodically.
To select an item, enter a number in the quantity box and click "add."
Part Number
Description
Unit Price
Qty
900-213 DTG Textile PreTreat Kit (pt# 900-213)
DTG Textile PreTreat / Spray Kit is a combination of both the Textile Pre-Treatment & Pump Spray Bottle. Get both by purchasing this kit and save a couple bucks.
PLEASE FOLLOW INSTRUCTIONS
For the transition to the new DTG BRIGHT INKS. If the system is not properly flushed then a build up of old white ink can cause clogging in the system.
1. Use warm distilled water to flush the lines out until the tubes are clear. The water temperature should be 52 C / 125 F temperature. (It may take some time to flush until clear. The greater the build up the longer it will take.)
2. Flush the distilled water out of the lines and then immediately follow flushing with Textile 2 Cleaning Solution.
3. Run ten (10) head cleaning cycles with the cleaning solution in the system to make sure the print head is completely clear of remaining residue.
Now the system is ready to receive the new BRIGHT INKS. This extensive flushing is required for the transition to the new bright inks; however it is never a bad idea to flush your entire ink system this way periodically.
PLEASE FOLLOW INSTRUCTIONS
For the transition to the new DTG BRIGHT INKS. If the system is not properly flushed then a build up of old white ink can cause clogging in the system.
1. Use warm distilled water to flush the lines out until the tubes are clear. The water temperature should be 52 C / 125 F temperature. (It may take some time to flush until clear. The greater the build up the longer it will take.)
2. Flush the distilled water out of the lines and then immediately follow flushing with Textile 2 Cleaning Solution.
3. Run ten (10) head cleaning cycles with the cleaning solution in the system to make sure the print head is completely clear of remaining residue.
Now the system is ready to receive the new BRIGHT INKS. This extensive flushing is required for the transition to the new bright inks; however it is never a bad idea to flush your entire ink system this way periodically.
PLEASE FOLLOW INSTRUCTIONS
For the transition to the new DTG BRIGHT INKS. If the system is not properly flushed then a build up of old white ink can cause clogging in the system.
1. Use warm distilled water to flush the lines out until the tubes are clear. The water temperature should be 52 C / 125 F temperature. (It may take some time to flush until clear. The greater the build up the longer it will take.)
2. Flush the distilled water out of the lines and then immediately follow flushing with Textile 2 Cleaning Solution.
3. Run ten (10) head cleaning cycles with the cleaning solution in the system to make sure the print head is completely clear of remaining residue.
Now the system is ready to receive the new BRIGHT INKS. This extensive flushing is required for the transition to the new bright inks; however it is never a bad idea to flush your entire ink system this way periodically.
PLEASE FOLLOW INSTRUCTIONS
For the transition to the new DTG BRIGHT INKS. If the system is not properly flushed then a build up of old white ink can cause clogging in the system.
1. Use warm distilled water to flush the lines out until the tubes are clear. The water temperature should be 52 C / 125 F temperature. (It may take some time to flush until clear. The greater the build up the longer it will take.)
2. Flush the distilled water out of the lines and then immediately follow flushing with Textile 2 Cleaning Solution.
3. Run ten (10) head cleaning cycles with the cleaning solution in the system to make sure the print head is completely clear of remaining residue.
Now the system is ready to receive the new BRIGHT INKS. This extensive flushing is required for the transition to the new bright inks; however it is never a bad idea to flush your entire ink system this way periodically.
PLEASE FOLLOW INSTRUCTIONS
For the transition to the new DTG BRIGHT INKS. If the system is not properly flushed then a build up of old white ink can cause clogging in the system.
1. Use warm distilled water to flush the lines out until the tubes are clear. The water temperature should be 52 C / 125 F temperature. (It may take some time to flush until clear. The greater the build up the longer it will take.)
2. Flush the distilled water out of the lines and then immediately follow flushing with Textile 2 Cleaning Solution.
3. Run ten (10) head cleaning cycles with the cleaning solution in the system to make sure the print head is completely clear of remaining residue.
Now the system is ready to receive the new BRIGHT INKS. This extensive flushing is required for the transition to the new bright inks; however it is never a bad idea to flush your entire ink system this way periodically.
PLEASE FOLLOW INSTRUCTIONS
For the transition to the new DTG BRIGHT INKS. If the system is not properly flushed then a build up of old white ink can cause clogging in the system.
1. Use warm distilled water to flush the lines out until the tubes are clear. The water temperature should be 52 C / 125 F temperature. (It may take some time to flush until clear. The greater the build up the longer it will take.)
2. Flush the distilled water out of the lines and then immediately follow flushing with Textile 2 Cleaning Solution.
3. Run ten (10) head cleaning cycles with the cleaning solution in the system to make sure the print head is completely clear of remaining residue.
Now the system is ready to receive the new BRIGHT INKS. This extensive flushing is required for the transition to the new bright inks; however it is never a bad idea to flush your entire ink system this way periodically.
PLEASE FOLLOW INSTRUCTIONS
For the transition to the new DTG BRIGHT INKS. If the system is not properly flushed then a build up of old white ink can cause clogging in the system.
1. Use warm distilled water to flush the lines out until the tubes are clear. The water temperature should be 52 C / 125 F temperature. (It may take some time to flush until clear. The greater the build up the longer it will take.)
2. Flush the distilled water out of the lines and then immediately follow flushing with Textile 2 Cleaning Solution.
3. Run ten (10) head cleaning cycles with the cleaning solution in the system to make sure the print head is completely clear of remaining residue.
Now the system is ready to receive the new BRIGHT INKS. This extensive flushing is required for the transition to the new bright inks; however it is never a bad idea to flush your entire ink system this way periodically.
Regular Price: $54.95
DTG Bright Inks- 125ml bottle Bright Yellow
$54.95
900-318 DTG Bright White 16oz (pt# 900-318)
Newly Improved White Ink.
Benefits are: Better Jettability/Less Print-Head Wear Softer Separation/Higher Brightness
DTG Bright White Ink is the solution for being able to print on dark colored, cotton garments with your DTG printer. The Bright White ink comes in 16 oz bottles and works best at a comfortable room temperature. This product works exclusively with our DTG White Ink Pre-Treatment and Textile 2 ink system. Still uses the same DTG White Pre-treat.
Not to be used with polyester blend garments.
Proper instructions to flush out your system for this changover will be included. Mixing the white inks can cause ink flow issues and, in extreme cases, cause print head clogs.
900-340 DTG Textile Post Treatment 10.5oz (pt# 900-340)
Provides a durable, protective finish to all of your non-textile items printed with the DTG inkjet printer. To be used in conjunction with the DTG Non Textile Pre-Treatment.
Regular Price: $0.00
DTG Textile Post Treatment 10.5oz
$29.95
900-341 DTG Non Textile Pre-Treatment 16oz (pt# 900-341)
Prepares the surface of most non textile products to accept the DTG inks properly. This product needs to be used in conjunction with the DTG Non Textile Post-Treatment.
Regular Price: $0.00
DTG Non Textile Pre-Treatment 16oz
$27.95
900-342 DTG White Tex PreTreat 1 liter (pt# 900-342)
DTG White Ink Pre-Treatment is a large part of the solution for printing on dark colored garments with your DTG printer. This product works exclusively with our DTG Textile 2 inks.
